E-SERIES CUTAWAY MODELS
360° COLOURIZER
2024 E-SERIES CUTAWAY
Exterior
U.S. Model Shown.
Aftermarket equipment shown.
E-350 SINGLE-REAR-WHEEL CUTAWAY
The E-350 Cutaway with single-rear-wheels delivers all the power and capability needed for a wide range of commercial and recreational applications. It's powered by a standard 7.3L V8 Premium-Rated Engine or available 7.3L V8 Economy-Rated Engine. It has a standard GVWR of 10,050 lbs. *20
E-350 DUAL-REAR-WHEEL CUTAWAY
The E-350 with dual rear wheels offers mid-range capacities in available GVWRs from 11,500 lbs. to 12,500 lbs. *20, with an available max payload rating of 7,210 lbs. ** (minus body weight)20. The E-350 DRW is powered by a standard 7.3L V8 Premium-Rated Engine or available 7.3L V8 Economy-Rated Engine.
E-450 DUAL-REAR-WHEEL CUTAWAY
The E-450 with dual rear wheels delivers high-end capability with an available GVWR of 14,500 lbs. * and an available payload rating of 8,980 lbs. (minus body weight). **20 If you’re into towing heavy loads, the E-450 DRW has a maximum GCWR of 22,000 lbs.20 Power is supplied by a standard 7.3L V8 Premium-Rated Engine or available 7.3L V8 Economy-Rated Engine.
7.3L V8 PREMIUM-RATED
Torque rules in the world of work trucks, especially when you're delivering heavy loads under demanding stop-and-go conditions. Featuring a torque rating of 450 lb.-ft. at 3,750 rpm and 325 horsepower at 3,800 rpm, the standard Premium-Rated Gas Engine generates the raw power required for a multitude of applications and upfits.
FORD TORQSHIFT® SIX-SPEED AUTOMATIC TRANSMISSION
The Ford TorqShift® Six-Speed Automatic Transmission is built by Ford to handle the high-performance demands of commercial applications. And the Tow/Haul Mode automatically compensates for grade and load conditions, and delays transmission upshifts to help reduce the frequency of gear hunting.
AVAILABLE PROGRAMMABLE UPFITTER INTERFACE MODULE
Upfitting is easier than ever with the available factory-installed programmable upfitter interface module (UIM). Using a laptop or notebook, an upfitter can connect electrical equipment to CAN buses or ports and program switches to operate aftermarket-installed equipment, such as lift buckets, cranes, a refrigeration unit or generator with up to nine digitally configurable inputs.
AVAILABLE HIGH-CAPACITY UPFITTER SWITCHES
Four available upfitter switches (30 amp, 30 amp, 15 amp and 10 amp) with fuses and relays provide a convenient way to connect a variety of aftermarket accessories to your vehicle’s electrical system. They’re factory-installed and integrated into the Instrument Panel, so there’s no need to cut into the truck’s electrical system when installing accessories such as beacon lights or a two-way radio.